Are you seeking help maintaining a reasonable temperature inside your vehicle, depending on the outside climate? Your wait is over with the ambient temperature sensor installed in most vehicles.
However, this temperature sensor can often get into some problems, preventing you from determining the suitable temperature/climate to maintain inside your car. In such situations, you will always find yourself shivering or sweating in your vehicle, depending on the outside weather.
If you are wondering why it’s crucial to reset the ambient temperature sensor in your Ford, be it F150, F250, Focus, Edge, or Fusion model, and are looking for a method to reset outside temperature gauge in car, this guide has all the information you need.
Why Reset the Ambient Temperature Sensor in a Ford?
Before moving toward the actual process, where I tell you how do I reset the ambient temperature sensor, let me first list why the sensor is crucial for a better driving experience and what can prompt you to reset it.
Wrong Readings
When the ambient temperature sensors stop working, you might not be able to get accurate or correct readings on the outside temperature and climate situation. When this happens, you won’t be able to set the right temperature inside your car, causing discomfort.
Sensor Calibration
If you get your car’s maintenance done or replace the sensor with a new one, you would need to calibrate it to ensure it gives accurate temperature readings.
Note: You might be interested to know what happens when you disconnect the throttle position sensor.
Problem Diagnosis
In addition to enabling you to set the right temperature inside your car, the ambient temperature sensor also serves problem diagnosis purposes. To avoid such issues, it’s essential to reset the sensor.
Seasonal Changes
A working ambient temperature sensor helps you easily navigate through seasonal changes as you can adapt and change the temperature settings accordingly.
Method on How to Reset the Ambient Temperature Sensor in a Ford
Now that you know why resetting the ambient temperature sensor in your Ford is necessary, let’s dive into the steps to get it done.
1. Turn on Ignition/Start the Vehicle
Firstly, turn on your vehicle’s ignition or press the “START” button to start the car. You can give the ignition even when the engine is already running.
Note: Check out this guide to learn more about the Service theft deterrent system car won’t start issue.
2. Go to the Information Screen
Once the vehicle is started, use the front or the steering wheel buttons to access the screen where information on the outside temperature is displayed. You can find this screen typically on the vehicle’s information display.
3. Find the Reset Button
The Ford vehicle generally has a Reset button for the outside temperature sensor. To reset the ambient temperature sensor, scroll on the information display screen to locate this button.
4. Reset the Sensor
Once you have found the reset sensor, press and hold it for some time. You need to hold the reset button for a few seconds until the temperature display screen shows a default temperature value, usually 32°F or 0°C.
5. Do the Confirmation
After releasing the release button, find the temperature display screen to confirm that you see the default temperature value on it. If the numbers you are seeing are 32°F or 0°C, you can take a sigh of relief as you have successfully reset the ambient temperature sensor in your Ford. You can also check out the video below for any help you might need in resetting the sensor.
Conclusion
No one likes suffering inside a car with low or high-temperature settings just because the ambient temperature sensor stops working. Hopefully, this guide will help you reset the sensor and dodge any problems it comes with.
In this write-up, I have tried exploring some reasons to reset the ambient temperature sensor and included all the steps you can follow to make it possible for you. Thanks for reading this guide and I would love to know your story with resetting the ambient temperature sensor below.
