Many people use the Tesla Walk Away door lock to lock and open their cars because it is easy. But sometimes it doesn’t need to be fixed, which is annoying.
Common Causes Of Why Isn’t My Tesla Locking When I Walk Away?
Have you ever noticed your walk-away lock is unavailable? Here are some reasons why Tesla won’t lock, that might explain why:
- Bluetooth Troubles: Sometimes, your phone’s Bluetooth (especially on Android) acts up and messes with the walk-away lock.
- Sensor Mix-up: Occasionally – your car’s sensors get confused and think someone’s still in the driver’s seat, so it doesn’t lock when you step away.
- Tricky Settings or Sensors: Your car’s settings or seat belt sensors might accidentally turn off the walk-away lock. Look out for any strange messages on your car’s screen or app.
- Software Glitches: Sometimes, the car’s software might act hilarious, causing the walk-away lock to take a break.
- Accidentally Switch-off: You might accidentally switch off the Walk Away Lock in your car’s settings without even realizing it.
- App Issues: If your Tesla app acts weird or its settings become confusing, it could mess with the Walk Away feature.
How To Fix Tesla Walk Away Lock Not Working?
Are there any problems with your Tesla’s Walk away door lock feature? Here are some possible reasons for the failure and possible responses to these issues.
1. Firmware Not Matching with the Software
If the walk-away lock on your Tesla isn’t working, the software and code aren’t matching up. There may be problems with some features because of this.
You can change the following things:
How to Resolve?
- Update via Tesla Touchscreen: Access Controls > Software > Software Update on the car’s touchscreen. Initiate the update installation.
- Software Update through Tesla App: Open the Tesla App on your smartphone, navigate to Software Update, and begin the update process.
2. System Failure
Your Tesla’s Walk-Away lock might stop working because of problems inside the system. These errors cause signals to be transmitted incorrectly, leading to the function not working properly. Here are some things you can do to fix this:
How to Resolve?
- Reboot the Tesla: Press and hold both scroll buttons simultaneously for about 10 seconds to reboot the car’s system.
- Hard Reset: Open the front trunk, remove the battery cover, disconnect the 12V battery ground wire and high-voltage loop plug for approximately 5 minutes, and reconnect them.
- Power Off: Navigate to Controls > Safety > Power Off on the touchscreen. Wait 2 – 5 minutes before restarting by pressing the brake pedal or opening the door.
3. Incorrect Settings
Often, a Walk-Away lock that doesn’t work is caused by inaccurate setup settings. This can include Bluetooth, Location, or Mobile Data settings in the Tesla App. Here’s how to address this:
How to Resolve?
- Activate Walk-Away Door Lock: Access Controls > Locks > Walk-Away Door Locks on the touchscreen and ensure it’s set to ‘On.‘
- Configure Bluetooth and Location Settings: Enable Bluetooth, set Location to ‘Always,‘ and grant permissions for Background App Refresh and Cellular or Mobile Data for the Tesla App on your phone.
4. Faulty Driver’s Seat Sensor
A defective driver-side seat sensor can disrupt the proper functioning of the Walk-Away lock. When this sensor fails, the car might not recognize that the driver has left, causing specific systems to stay on even after locking the vehicle. Here’s what you should do:
How to Resolve?
- Seek Professional Assistance: If you need help figuring out what’s wrong with the sensor, call a Tesla Service Center. Usually, this repair costs around $200, which includes the tools, the work, and the tax.
5. Other Possible Reasons
The Walkway lock might not work because of a few less common problems. Do these things to fix these problems:
How to Resolve?
- Turn off the “Exclude Home” setting: Go to “Controls“> “Locks” on the car’s screen and uncheck the box next to it. Ensure Keys Are Not Inside: Remove keys or key fobs inside the vehicle.
- Check Door/Trunk Closure: Verify that all doors and trunks are closed properly using the Tesla App or key fob.
- Exit Through Driver-Side Door: Always exit the car through the driver-side door to ensure proper triggering of the Walk-Away lock feature.
Similar Posts:
- Tesla Door won’t open
- Tesla Model 3 Frunk won’t open
- Tesla Wall Charger not working
- Tesla Screen not turning on
Tesla Model 3 Lock: Walk-Away Security Check
Ensuring your Model 3 locks properly, especially after addressing issues like Tesla not locking when walking away, is essential. Here’s how to check if your car is securely locked:
- Side Mirror Check: Upon locking, the side mirrors automatically fold in. If they don’t, your car might be unlocked.
- Light Confirmation: Locking triggers a single flash of the exterior lights. The security system in your car might only work if the lights aren’t flashing. This could be because the battery is dead or the phone key is disconnected.
Conclusion
If your Tesla doesn’t lock when you walk away, it could be faulty seat belt monitors, issues with the driver’s settings, the walk-away feature being removed by accident, or Bluetooth disconnections.
You can fix these problems and ensure that your Tesla locks appropriately before you leave by following the included step-by-step instructions.
