The CNC71 PRO Kit, designed specifically for BMW E8x and E9x series models, is a crucial upgrade for anyone building a BMW E90 drift car. This kit significantly increases the steering angle (up to 68 degrees), allows precise Ackermann geometry adjustment, and offers quick alignment changes without disassembling components. It completely transforms the handling of your vehicle, providing unmatched precision and responsiveness—especially under demanding track conditions.
How Does the CNC71 PRO Kit Improve BMW E90 Handling?
Increased Steering Angle
Adjustability up to 68 degrees allows for extreme maneuverability in tight corners and superior control during E90 and E92 drifting sessions.
Direct Steering Response
The use of spherical bearings replaces OEM rubber bushings, delivering sharp, responsive feedback to every steering input.
Reduced Body Roll
By raising the roll center, the car becomes more stable during aggressive direction changes—an essential trait in competitive drifting.
Adjustable Suspension Geometry
Custom camber (-5.5°) and caster (6.5°) angles, along with tunable Ackermann, allow drivers to fine-tune the setup to match their preferred driving style and track conditions.
How to Install the Angle Kit on BMW E90 / E92?
1. Vehicle Preparation
Place the car on a lift and remove the factory front suspension components.
Prepare tools as outlined in the included installation guide.
2. Component Installation
Install the upper and lower control arms, tie rod relocators, and knuckles.
Secure all adjustable parts according to the manufacturer’s instructions.
3. Alignment Setup
Adjust camber and caster using eccentric bushings and spacers.
Set the Ackermann geometry to suit your preferred steering feel (neutral / positive / negative).
4. Testing & Calibration
Perform a test drive and fine-tune the suspension settings to achieve optimal alignment and performance.
Key Benefits of the PRO KIT Installation
Plug-and-Play Fitment
The kit fits factory mounting points on BMW E81, E82, E87, E88, E90, E91, E92, and E93 models. No cutting or welding required.
Premium Build Quality
Constructed from aluminum and structural steel, all components are CNC-machined in Wrocław, Poland. The parts are protected with powder coating or zinc plating for long-term durability.
Wide Compatibility
Compatible with 17”–19” wheels (minimum inner diameter: 400 mm). Designed for use with coilover suspension.
Full Technical Support & Spare Parts
All replacement parts are readily available. Technical support is provided by experienced staff—including assistance in Polish.
Why Choose the CNC71 PRO KIT for BMW E90 Drifting?
Thanks to its advanced engineering and full adjustability, this kit is:
- A top choice for E90 / E92 drift car builds
- A reliable and effective upgrade for BMW E90 suspension modifications
Summary
The CNC71 PRO KIT for BMW E8x / E9x is a high-end solution for drivers who demand precision handling and advanced tuning capabilities. With full compatibility for popular BMW platforms and a wide range of custom settings, this kit serves as the perfect foundation for both professional and amateur E90 drift setups.
